Micro compounder 15 ml High Torque (MC 15 HT) is a fully intermeshing recirculating 15 cm³ extruder consist out of two co-/counter-rotating self-cleaning 250 mm screws. The screw rotation speed can be increased up to 500 rpm, and the housing can be heated up to 350 °C.  The extrusion can be performed under modified atmospheres, e.g., nitrogen.

• The maximum operating temperature is 350 °C, and the screw rotation speed can be increased up to 500 rpm.
• The minimum required material for compounding is about 5 g.
• The maximum required material for compounding is about 15 g.

• The device is equipped with an auto feeder.

• The barrel sections are electrically heated.

• The screw diameter is 20 mm.

• The maximum screw rotational speed is 500 rpm.

• The maximum barrel temperature is about 350 ⁰C.

• The minimum required material for compounding is about 5 g.

• The maximum required material for compounding is about 15 g.

• The device is equipped with an Xplore winder unit.